A laboratory has much equipment that are complex but
important. It is essential to have basic knowledge about commonly used tools if
you are in any way related to labs and the industry that surrounds
laboratories. Here we are discussing two lab equipment that needs to be handled
with care. Both have an entirely different niche but essential. We’ll be
explaining the basic working of the two devices; one is concerned with the
bones and the other deals with the organisms invisible to the naked eye.
Understanding anaerobic incubator
Meaning of anaerobic is
‘living’, and the incubator is used to grow cell cultures and microbiological
cultures. So as the name suggests anaerobic incubator is used in the clinical laboratory to
isolate anaerobes from clinical material. It is compared with the standard jar
system for the isolation. It is used to study the microbial life present in the
environment with very less or no Oxygen.
When using an anaerobic incubator, it is vital to rejuvenating
the catalyst. It should be replaced at least once a week, and if the chamber is
busy then rejuvenate the catalyst more often. Always exchange the older one
with the new for having a fresh catalyst all the time. The temperature has to
be maintained during the changing of the catalyst.
Leaks may occur around the work areas. It is crucial
for the incubator to have a required amount of pre-mixed gases even when you
are detecting leaks. Even the slightest leaks can be identified by a towel
saturated with isopropyl alcohol. The towel should be placed inside for a few
minutes. Gloves and cuffs, along with chamber sleeves, under work pad, around
airlock seals, and all corners need to be checked first for the leaks.
Understanding X-ray viewer
X-ray viewers are
basically viewing boxes with the translucent surface. The translucent surface
covered light lamps which are visible. These boxes are used to observe medical
radiographs. There are different types of X-ray viewers available that an X-ray viewer supplier can
efficiently deliver. Some include a photo-sensor to detect the intensity of the
light while others have LED warning indicator which indicates the replacement
requirement of the light lamps.
The X-ray viewer can be made of metal or plastic, and ideally X-ray viewer supplier should have both in stock. It depends on the preferences of the buyer to choose. The viewers usually have a roller clip to hold the X-ray film. They are available in three kinds depending on the placement; desk, wall, and a-dec model.
